Using the jig to peen a scythe

Peening a scythe using the jig
This afternoon I peened a couple of scythe blades that I’ve been using for some contract work at Lancaster Castle. The peening jig is a brilliant tool, easy to use and when done well produces a very tidy and well-shaped edge in a short time.
Peening a scythe using the jig
Peening is the process of reshaping the blade to form the bevel into a shallower angle. The peening jig simplifies this process as the accuracy is, to a large extent, built into the tool.
These two photos show the bevel after peening with the two caps, the first cap creates a groove a few mm back from the edge and the second cap then smooths and thins the area towards the edge.
Peening a scythe using the jig Peening a scythe using the jig
A single pass with each of the caps can be enough to create a good bevel angle but I like to make a third pass, repeating cap no 2 but this time holding the edge of the blade slightly away from the guide post. This allows the jig to peen the scythe right to the edge and gives a finer shape.
Peening a scythe using the jig
I peened my 65cm Ditch blade and my Hahnsense, also 65cm long. The Hahnsense, which used to be called a Stone blade, is very similar to a Ditch blade but with a more curved belly. They’re both brilliant all-rounder blades for cutting everything from meadow grass to nettles, brambles and even small scrub.
Peening a scythe using the jig
With a nice, steady rhythm it took me about 45mins to peen both blades including getting my gear and packing up. A quick sharpen with a whetstone and the blades are ready for mowing later this week.
I am teaching a one day scythe peening workshop for Austrian scythes on 15th October at Slaidburn, Lancashire. Come and learn how to peen a scythe blade, how to repair cracks and meet up with other mowers at a lovely farm location. It’s a great way to finish off the mowing season. If you’d like to book a place, please email me at stevetomlin8@gmail.com

This entry was posted in peening & sharpening, Scytherspace and tagged , , , , . Bookmark the permalink.

6 Responses to Using the jig to peen a scythe

Leave a Reply to René Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.